04.4 Equipment for Repair/Maintenance/Cleaning, Workshop/Store Outfitting

Piston for SF11 Deck Hammer Pneumatic. To fit cutter heads.

Spare Head for SF1 / SF1 VL / SF11 Pneumatic Scaling Hammer single head. Cruciform taper fit cutter head.

Service Kit for SF11 Deck Hammer Pneumatic.

For fast scaling of decks the walk behind SF11 is a fast, effective means of removing hard coatings and corrosion.

Spare Twisted Knot Wire Brush for TFP200 Deck Scaler. Consists of drum & 14 crimped wire brush segments.

Spare Drum c/w Star Cutters for TFP200 Deck Scaler. Consists of drum, 4 12mm shafts, 80 TCT cutters & 88 spacers.

The TFP200 Deck Scaler is perfect for removing coatings and corrosion from decks, hatches and tank bottoms. The rigid steel chassis ensures a strong, stable machine suitable for accurate surface preparation. Production rates up to 30m_ per hour.

The TFP200 Deck Scaler is perfect for removing coatings and corrosion from decks, hatches and tank bottoms. The rigid steel chassis ensures a strong, stable machine suitable for accurate surface preparation. Production rates up to 30sqm per hour.

Made in accordance with DIN 1478. Closed body turnbuckle with locknut on both sides and clip with nut and bolt. Safety factor 4 (minimum breaking load is 4 x working load).

Made in accordance with DIN 1478. Closed body turnbuckle with locknut on both sides and clip with nut and bolt. Safety factor 4 (minimum breaking load is 4 x working load).

Made in accordance with DIN 1478. Closed body turnbuckle with locknut on both sides and clip with nut and bolt. Safety factor 4 (minimum breaking load is 4 x working load).

Made in accordance with DIN 1478. Closed body turnbuckle with locknut on both sides and clip with nut and bolt. Safety factor 4 (minimum breaking load is 4 x working load).

Made in accordance with DIN 1478. Closed body turnbuckle with locknut on both sides and clip with nut and bolt. Safety factor 4 (minimum breaking load is 4 x working load).

Made in accordance with DIN 1478. Closed body turnbuckle with locknut on both sides and clip with nut and bolt. Safety factor 4 (minimum breaking load is 4 x working load).

Made in accordance with DIN 1478. Closed body turnbuckle with locknut on both sides and clip with nut and bolt. Safety factor 4 (minimum breaking load is 4 x working load).

Made in accordance with DIN 1478. Closed body turnbuckle with locknut on both sides and clip with nut and bolt. Safety factor 4 (minimum breaking load is 4 x working load).

Closed body turnbuckle with an eye on one side and a locknut and clip with nut and bolt on the other side. Complete with slip hook.

Complies with EN 13889 standard. Completely galvanized with lacquered shoulder bolt. Bolt thicker than shackle. Safety factor 6 (minimum breaking load is 6 x working load).

Splicing Fid, Dia 45 mm

Trade quality. Stainless steel 316. Shackle and shoulder bolt are the same thickness. These shackles do not meet the requirements of the HEALTH & SAFETY INSPECTORATE and must therefore never ever be used for hoisting.

Made in accordance with DIN 580.